IKO CF30-1B Cam Follower and Track Roller - Stud Type

d:65.000 mm; D:140.0000 mm; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:101000 N; Oil Speed Rating n2:5600 rpm; B:33.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4300 rpm;

B:14.00 mm; D:47.0000 mm; Basic Dynamic Radial Load Rating C:12700 N; Basic Static Radial Load Rating Co:3400 N; Grease Speed Rating n1:15000 rpm; d:20.000 mm; Oil Speed Rating n2:18000 rpm; Fillet Radius ra:1.00 mm;

r3,4 min.:4 mm; Da min.:273 mm; C:55 mm; Ca min.:9 mm; Calculation factor Y0:0.9; a:58.002 mm; Db min.:292 mm; Mass bearing:24.8 kg; Calculation factor Y:1.7; Dimension series:2GB;

Fillet Radius ra:0.64 mm; Oil Speed Rating n2:16000 rpm; Basic Dynamic Radial Load Rating C:19900 N; Fillet Radius rb:0.30 mm; B:24.00 mm; D:40.0000 mm; d:17.000 mm; Grease Speed Rating n1:14000 rpm; Basic Static Radial Load Rating Co:13200 N;

Calculation factor Y0:2.5; ra max.:5 mm; d:440 mm; Fatigue load limit Pu:670 kN; Calculation factor Y1:2.4; da max.:513 mm; Limiting speed:180 r/min; d2 ≈:513 mm; Mass bearing:360 kg; r1,2 min.:6 mm;

h:28.575 mm; Bearing limiting speed:6300 r/min; Mass pillow block:14.3 kg; A2:120.65 mm; Initial grease fill:68.04 g; ba:32.544 mm; P150°:33.4 kN; P180°:40 kN; L:285.75 mm; Stabilizing ring:SR-15-0;

B:28.00 mm; Basic Static Radial Load Rating Co:104000 N; Accessories:One Shield; Basic Dynamic Radial Load Rating C:93600 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; d:170.000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; Sealed Speed Rating n3:1600 rpm; D:230.0000

B:16.00 mm; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:10000 rpm; D:62.0000 mm; Basic Static Radial Load Rating Co:11800 N; d:30.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:16800 N; Oil Speed Rating n2:13000 rpm;

h1:150 mm; G:M 42x2; d4 max.:68 mm; N max.:134 mm; C1 max.:38 mm; l3 min.:57 mm; l4 max.:230 mm; α:6 °; d2 max.:160 mm; d:60 mm;

Pu:1670 kN; Static (Cor):16.7 mm; with cylindrical bore:950 min-1; rs (min):4 mm; d:170 mm; D:360 mm; Dynamic (Cr):9 mm; Oil:207.560 kN; Grease:2280 kN; with tapered bore:1 250 min-1;

G:Tr 630x6; B1:413 mm; Nut for removal:HM 31/630; G2:G 1/4; A:9 mm; G1:38 mm; Hydraulic nut:HMV 126 E; Mass withdrawal sleeve:118 kg; d1:570 mm; d:600 mm;

Calculation factor Y0:2.5; Mass bearing + sleeve:153 kg; ra max.:4 mm; D1 ≈:450 mm; b:16.7 mm; d1:280 mm; D:500 mm; Calculation factor Y1:2.4; db min.:318 mm; Fatigue load limit Pu:380 kN;

C1 max.:48 mm; d:80 mm; G:M 80; Material constant KM:330; r1 min.:1 mm; w:90 mm; Basic static load rating C0:655 kN; Mass rod end:15 kg; d2 max.:182 mm; Specific dynamic load factor K:100 N/mm²;

Grease Speed Rating n1:2600 rpm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:142000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; Accessories:Shield & Seal; B:49.20 mm; Sealed Speed Rating n3:2600 rpm; Basic Static Radial Load Rating Co:176000 N; d:85.000 mm;

A1:88.9 mm; R1:53.181 mm; Ca:42.799 mm; P90°:82.7 kN; Cap bolt:2 x 5/8-11 UNC; Initial grease fill:87.885 g; Bearing:22216 E; H:174.625 mm; Lock nut:AN 16; Mass pillow block:20 kg;